Securitron AQ PDB-1R Fire Alarm Interface

Downloads, Certifications & Listings

The PDB-1R uses an end-of-line resistor to trigger a form "C" contact in response to a fire system alarm condition. In response to the trigger, the unit transfers power from the "Normally On" output to the "Normally Off" output. Additional triggered reactions include status feedback to fire control or annunciation systems, ground fault trigger and input trigger that latches until reset.

Product Features

  • Non Latching or Latching mode
  • 12 or 24VDC Operation
  • Reverse polarity protected
  • Normally ON & Normally OFF Output
  • Output LED’s indicate condition
  • Form C Contacts Indicates Trigger Status
  • UL Listed Sub Assembly for Access Control and Burglar Alarm Systems
  • MagnaCare® lifetime replacement, no fault warranty

Specification Data

  • 70mA used for relay control
  • Universal 11-29 VDC input
  • 2.23"W x 3.75"L x 0.8H
  • 12 Amp Transfer Relay Contacts
  • Size: 2.23”W x 3.75”L x .8”H

 

Part # Description
PDB-1R Fire Trigger/Relay Interface Board

 

Patent pending and/or patent assaabloydss.com/patents

Certifications
  • UL 294 – Access Control System Unit
    • Line Security Level I
    • Endurance Test Level IV
    • Standby Power Level I, Attack Test Level I
  • UL 603 – Power supplies for Use with Burglar Alarm Systems
  • ULC S318 – Power supplies for Burglar Alarm Systems
  • ULC S533 – Standard for Egress Door Securing and Releasing Device